23-12-17, 11:13 AM
Colegas buen dia les comparto este backup del ZTE V6 Plus que realize con NCKBox...saludos a todos!!
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM21)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x513331334d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 15010051333133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
High speed disabled by user, continue with this settings.
Build ID: MRA58K
Display ID: TEL_MX_Blade_V6_PlusV1.0.1
Version: 6.0
Build Date: 2017年 11月 14日 星期二 00:44:08 CST
Model: Blade V6 Plus
Brand: ZTE
Device: ZTE_BLADE_V0720
Manufacturer: ZTE
Mediatek Version Release: TEL_MX_Blade_V6_PlusV1.0.1
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start procesing nvram
IMEI[1] from NVRAM: 368879XXXXXXX
IMEI[2] from NVRAM: 368879XXXXXXX
Start procesing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start procesing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start procesing lk ......
Start processing boot
Start processing recovery
Start procesing logo ......
Start procesing ztecfg ......
Reading: BEGIN: 0x4f80000 - LEN: 0x80000
Start procesing secro
Reading: BEGIN: 0x5280000 - LEN: 0x600000
Start procesing trustzone
Start procesing frp ......
Reading: BEGIN: 0x6a80000 - LEN: 0x100000
Start procesing nvdata ......
Reading: BEGIN: 0x6b80000 - LEN: 0x2000000
Start procesing system
Reading: BEGIN: 0xb000000 - LEN: 0xc0000000
Saved to : C:\Users\Betin Lpez\Documents\Android_MTK\firmware_backup\MT6735M_EMMC_ZTE_Blade V6 Plus_6_0_TEL_MX_Blade_V6_PlusV1_0_1(2017_12_19_02_18)
Wait untill phone will start charging.
All done.
Haz clic en el botón Agradecer para ver éeste contenido
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM21)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x513331334d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 15010051333133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
High speed disabled by user, continue with this settings.
Build ID: MRA58K
Display ID: TEL_MX_Blade_V6_PlusV1.0.1
Version: 6.0
Build Date: 2017年 11月 14日 星期二 00:44:08 CST
Model: Blade V6 Plus
Brand: ZTE
Device: ZTE_BLADE_V0720
Manufacturer: ZTE
Mediatek Version Release: TEL_MX_Blade_V6_PlusV1.0.1
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start procesing nvram
IMEI[1] from NVRAM: 368879XXXXXXX
IMEI[2] from NVRAM: 368879XXXXXXX
Start procesing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start procesing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start procesing lk ......
Start processing boot
Start processing recovery
Start procesing logo ......
Start procesing ztecfg ......
Reading: BEGIN: 0x4f80000 - LEN: 0x80000
Start procesing secro
Reading: BEGIN: 0x5280000 - LEN: 0x600000
Start procesing trustzone
Start procesing frp ......
Reading: BEGIN: 0x6a80000 - LEN: 0x100000
Start procesing nvdata ......
Reading: BEGIN: 0x6b80000 - LEN: 0x2000000
Start procesing system
Reading: BEGIN: 0xb000000 - LEN: 0xc0000000
Saved to : C:\Users\Betin Lpez\Documents\Android_MTK\firmware_backup\MT6735M_EMMC_ZTE_Blade V6 Plus_6_0_TEL_MX_Blade_V6_PlusV1_0_1(2017_12_19_02_18)
Wait untill phone will start charging.
All done.
Haz clic en el botón Agradecer para ver éeste contenido
Elige un trabajo que te guste y no tendrás que trabajar ni un día de tu vida!!