27-09-17, 10:24 PM
Que tal compañeros, me uno a este tema ya que no he podido solucionar el problema de boot de un ms631, y como mencionan a qui que se puede con el sporte para el h631, me di la tarea de hacerlopero sin resultados, ya que arrojo este error, algien del foro con experencia en JTAG que me pueda ayudar
Welcome to Octoplus Pro JTAG Software version 1.4.4.
Started.
Reader #0: Axalto e-gate 0
Reader #1: Generic EMV Smartcard Reader 0
Downloaded and installed file C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/LG_H631_EMMC_R311MB.srf.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : H631
SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/LG_H631_EMMC_R311MB.srf
Voltage : 2.2V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Samsung eMMC R311MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100523331314D4201599BD4A47277
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : R311MB
Product revision : 0.1
Product serial number : (hex) 599BD4A4
Manufacturing date : 07/1999
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for emmc v4.0)
Erase block size : 0 Kbytes
Boot1 size : 0 Kbytes
Boot2 size : 0 Kbytes
RPMB size : 0 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/R311MB_26_09_2017_10_31_40.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.4; FW: 1.22.
Repairing from file "C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/LG_H631_EMMC_R311MB.srf".
Write data verification is enabled.
Writing GPT partition...
Write verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.
Welcome to Octoplus Pro JTAG Software version 1.4.4.
Started.
Reader #0: Axalto e-gate 0
Reader #1: Generic EMV Smartcard Reader 0
Downloaded and installed file C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/LG_H631_EMMC_R311MB.srf.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : H631
SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/LG_H631_EMMC_R311MB.srf
Voltage : 2.2V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Samsung eMMC R311MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100523331314D4201599BD4A47277
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : R311MB
Product revision : 0.1
Product serial number : (hex) 599BD4A4
Manufacturing date : 07/1999
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for emmc v4.0)
Erase block size : 0 Kbytes
Boot1 size : 0 Kbytes
Boot2 size : 0 Kbytes
RPMB size : 0 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/R311MB_26_09_2017_10_31_40.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.4; FW: 1.22.
Repairing from file "C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/LG_H631_EMMC_R311MB.srf".
Write data verification is enabled.
Writing GPT partition...
Write verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.