30-07-17, 08:35 AM
I've been thinking of you guys if you want to help me with p8lite ....
First i was short on board (l1201 and l201) so I replaced u201 and the short and gone ... but it does not turn on yet so I went to measure on the ignition connector (j2401) and only on tp2402, pin3, I have the 1.8v, measuring towards the mass ho
Pin2 5mohm,
Pin3 0.2mohm,
Pin4 9.7kohm.
Then I measured the battery connector that are divided into two groups
Pin p1-p2-p3 0.19v
Pin p4-p5-p6 0.19v
Would you give me your hand please ???
First i was short on board (l1201 and l201) so I replaced u201 and the short and gone ... but it does not turn on yet so I went to measure on the ignition connector (j2401) and only on tp2402, pin3, I have the 1.8v, measuring towards the mass ho
Pin2 5mohm,
Pin3 0.2mohm,
Pin4 9.7kohm.
Then I measured the battery connector that are divided into two groups
Pin p1-p2-p3 0.19v
Pin p4-p5-p6 0.19v
Would you give me your hand please ???
