lg p768g Restaurar el arranque de tu L9 PARTITION DOES NOT EXIST

[Pulidonet]

[color=rgb(51, 51, 51)][/color]

[color=rgb(51, 51, 51)]Restaurar el arranque de tu L9 ERROR [/color]

[color=rgb(51, 51, 51)][/size]partition does not exist[/color]
[color=rgb(51, 51, 51)][/size][/color]

[color=rgb(51, 51, 51)][/color]

[/size]Conecte el cable USB
Ponga la bateria rapidamente!
waiting for OMAP44xx device...

Device descriptor:
        bLength            = 18
        bDescriptorType    = 1
        bcdUSB            = 528
        bDeviceClass      = 255
        bDeviceSubClass    = 255
        bDeviceProtocol    = 255
        bMaxPacketSize0    = 64
        idVendor          = 451
        idProduct          = D00F
        bcdDevice          = 0
        iManufacturer      = 33
        iProduct          = 37
        iSerialNumber      = 0
        bNumConfigurations = 1
reading ASIC ID
usb_write 4
usb_read 81
[*] read 0 bytes
NumOfSubblocks: 0x5
Subblock ID: 0x1
Subblock Size: 0x5
CH enabled: 0x7
ROM revision: 0x4
Checksum Subblock: 0x15
CHIP: 4430
IDEN: da7b8b012befffce8c996a602bef346a956f2a72
MPKH: 5f4092eccddf90fa43f546adf89508b31b9c74795e9516194c0ea6412fdcb7f6
CRC0: 9c669ad9
CRC1: 682adccf
sending 2ndstage to target... f0030002
usb_write 4
usb_write 4

wait 5-lelelel...

[*] msg size = 4
usb_write 21552
[*] data size = 21552
usb_close

Reopen usb...


Device descriptor:
        bLength            = 18
        bDescriptorType    = 1
        bcdUSB            = 528
        bDeviceClass      = 255
        bDeviceSubClass    = 255
        bDeviceProtocol    = 255
        bMaxPacketSize0    = 64
        idVendor          = 451
        idProduct          = D00F
        bcdDevice          = 0
        iManufacturer      = 33
        iProduct          = 37
        iSerialNumber      = 0
        bNumConfigurations = 1
waiting for 2ndstage response...
usb_read 4
usb read = aabbccdd
accepted 2ndstage response
sending image to target...
size = 246272
usb_write 4
usb_write 246272
** Done **
< waiting for device >
sending 'x-loader' (384 KB)...
OKAY [ 99.839s]
writing 'x-loader'...
FAILED (remote: partition does not exist)
finished. total time: 99.842s
sending 'u-boot' (1024 KB)...
OKAY [  0.529s]
writing 'u-boot'...
FAILED (remote: partition does not exist

)
finished. total time: 0.536s
Echo!
Presione una tecla para continuar . . .

Que procede colegas?[size=14px]

[Pulidonet]