+- Foro Servicell (https://www.servicell-arauca.com/foros)
+-- Foro: Tecnologia GSM (https://www.servicell-arauca.com/foros/forumdisplay.php?fid=5)
+--- Foro: Samsung (https://www.servicell-arauca.com/foros/forumdisplay.php?fid=68)
+---- Foro: Aportes y Soluciones (https://www.servicell-arauca.com/foros/forumdisplay.php?fid=70)
+---- Tema: Frp j710mn octopus (/showthread.php?tid=19754)
Frp j710mn octopus - Reynaldo Manrique - 21-03-18
Marca: Samsung
Numero de Modelo: J710mn
¿De que se trata el aporte?: FRP
Lo hice con Octopus Dongle y Pegasus Box como interfas,facil y sin flashear nada,espero les sirva,saludos
Bienvenido en Octoplus Box Samsung software versión 2.6.3
-----------------------------------------------------------------------------------
To connect SM-G920A phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM54
Modelo seleccionado: SM-J710MN
Searching for UART interface..
UART interfaces not found!
Operation was failed!
Performed by 2.6.3 Software version.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM25
Modelo seleccionado: SM-J710MN
Searching for UART interface.. COM21
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Leyendo data...
Checking operation...
An error hace occurred on step 2
Operation was failed!
Performed by 2.6.3 Software version.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM25
Modelo seleccionado: SM-J710MN
Searching for UART interface.. COM21
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Leyendo data...
Checking operation...
An error hace occurred on step 2
Operation was failed!
Performed by 2.6.3 Software version.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM25
Modelo seleccionado: SM-J710MN
Searching for UART interface.. COM21
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Leyendo data...
Checking operation...OK
Searching for UART interface.. COM21
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..unsuccessful
Searching for UART interface.. COM21
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (2/4 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.3 Software version.