+- Foro Servicell (https://www.servicell-arauca.com/foros)
+-- Foro: Tecnologia GSM (https://www.servicell-arauca.com/foros/forumdisplay.php?fid=5)
+--- Foro: Samsung (https://www.servicell-arauca.com/foros/forumdisplay.php?fid=68)
+--- Tema: Como escrbo un respaldo de emmc con octo (/showthread.php?tid=18088)
Como escrbo un respaldo de emmc con octo - matias rios - 20-12-17
Marca: samsung
Numero de Modelo: sm-j111m
Falla: fail write
Soluciones que NO funcionaron: No detecat el ordenador x usb . No marca consumo . Equipo nuevo
Hola , conecte por medio de pinout emmc un j111m , a octoplus pro, fui al apartadoemmc " service " luego write/update firmware , y aqui de di a write " KLM4G1FE3B-B001 " por error (xq no es para este emmc ) y ya no me detecta mas. DIce que tengo un respaldo pero no se como intalarlo . Todo ayuda
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J111M
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_SM-J111M_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC 000000
Page size : 512 B
Block size : 512 B
Block count : 1048576
Size : 512.00 MB
---------------------------------------------------------------
CID Info
CID : 150100303030303030562014031443C7
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 000000
Product revision : 5.6
Product serial number : (hex) 20140314
Manufacturing date : 04/2016
---------------------------------------------------------------
CSD Info
CSD : 902701320F5903FFF6DB7FE08A40403B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for emmc v4.41)
Erase block size : 512 Kbytes
Boot1 size : 512 Kbytes
Boot2 size : 512 Kbytes
RPMB size : 128 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/000000_20_12_2017_15_34_10.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.8; FW: 1.22.
Re: como escrbo un respaldo de emmc con octo - Reci Cel - 20-12-17
este es el foro de octopus
http://forum.gsmhosting.com/vbb/f594/