(23-10-17, 12:20 PM)Miguel Rodriguez escribió: Marca: Motorola

Numero de Modelo: E4 y E4 Plus

¿De que se trata el aporte?: Liberacion


Aqui les comparto la forma de liberar este nuevo modelo de motorola he 4ta generacion
use NCK en modulo MTK solo hay que seleccionar el procesador MT6737M y le das direct unlock, conectas el equipo apagado y en segundos listo

aqui el log


Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM88)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 15010051453133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM90)
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:97) Code : 2390677842702262
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Unlocked (remain:100) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.

(23-10-17, 12:20 PM)Miguel Rodriguez escribió: Marca: Motorola

Numero de Modelo: E4 y E4 Plus

¿De que se trata el aporte?: Liberacion


Aqui les comparto la forma de liberar este nuevo modelo de motorola he 4ta generacion
use NCK en modulo MTK solo hay que seleccionar el procesador MT6737M y le das direct unlock, conectas el equipo apagado y en segundos listo

aqui el log


Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM88)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 15010051453133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM90)
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:97) Code : 2390677842702262
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Unlocked (remain:100) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.

(14-02-18, 06:49 PM)Repara-Cel GT escribió:

(23-10-17, 12:20 PM)Miguel Rodriguez escribió: Marca: Motorola

Numero de Modelo: E4 y E4 Plus

¿De que se trata el aporte?: Liberacion


Aqui les comparto la forma de liberar este nuevo modelo de motorola he 4ta generacion
use NCK en modulo MTK solo hay que seleccionar el procesador MT6737M y le das direct unlock, conectas el equipo apagado y en segundos listo

aqui el log


Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM88)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 15010051453133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM90)
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:97) Code : 2390677842702262
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Unlocked (remain:100) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.

depende del numero de modelo por que el Xt1764 es Qualcomm no es posibbe