+- Foro Servicell (https://www.servicell-arauca.com/foros)
+-- Foro: Tecnologia GSM (https://www.servicell-arauca.com/foros/forumdisplay.php?fid=5)
+--- Foro: Chinos MTK, SPD y otros (https://www.servicell-arauca.com/foros/forumdisplay.php?fid=50)
+--- Tema: Ipro wave 4.0 (/showthread.php?tid=10782)
Ipro wave 4.0 - karlvnz - 24-12-16
Me llego este equipo porque se quedaba en el logo y decidi flashearlo pero se me olvido desmarcar el preloader ahora no me quiere flashear esto es lo que me arroja con la nck crack Flash files count is :8
Action : Firmware update.
Selected 0-By CPU: MT6572_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Full Flash Skip Preloader
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM23)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [KINGSTON] KTN0403CS_TCR1
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 224 BMT Blocks 80
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM18)
Flash NAND Algo Start.
FORMAT NAND FLASH : BEGIN: 0x129c0000 - LEN: 0x700000
FORMAT NAND FLASH : BEGIN: 0x130c0000 - LEN: 0xc4c0000
Format Range: 0X130C0000 ~ 0X1F57FFFF
Format Size: 1.54Gb
Bad Blocks: 0
Error Blocks: 4
Total Blocks: 787
Bad/Error Block Ratio: (0.508%)
Error FlashTool Download: S_STORAGE_NOT_MATCH
Wait untill phone will start charging.
All done.