11-03-19, 08:21 PM
(Última modificación: 11-03-19, 08:23 PM por cesarvg80@gmail.com.
Razón: falta de ortografia.
)
Marca: alcatel
Numero de Modelo: 5012g
Falla: sin señal
Soluciones que NO funcionaron: flasheo, unlock con nck
tengo un alcatel 5012g que lo llevaron a cambio de operador de telcel a at&t Mexico, no da señal de ningún operador al hacerle unlock con la nck box marca este error anexo log:
Exe version: NCKBox AndroidMTK 1.8.9.8
Selected model: Alcatel OT-5012G
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39354B : 00000000000000
EMMC UA SIZE: 0x1d3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d3600000 [7.303 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM69)
[5][error read imei]Warning, imei posible damaged!!.
Reading security, wait...
[3140]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
Wait untill phone will start charging.
All done.
le hice el flash de una rom pero no funciono, le cargue de nuevo el respaldo que hice del equipo y continua sin señal.
Numero de Modelo: 5012g
Falla: sin señal
Soluciones que NO funcionaron: flasheo, unlock con nck
tengo un alcatel 5012g que lo llevaron a cambio de operador de telcel a at&t Mexico, no da señal de ningún operador al hacerle unlock con la nck box marca este error anexo log:
Exe version: NCKBox AndroidMTK 1.8.9.8
Selected model: Alcatel OT-5012G
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39354B : 00000000000000
EMMC UA SIZE: 0x1d3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d3600000 [7.303 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM69)
[5][error read imei]Warning, imei posible damaged!!.
Reading security, wait...
[3140]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
Wait untill phone will start charging.
All done.
le hice el flash de una rom pero no funciono, le cargue de nuevo el respaldo que hice del equipo y continua sin señal.