13-10-18, 06:22 PM
(Última modificación: 13-10-18, 06:24 PM por nilsonperdomo92.)
Marca: Huawei
Numero de Modelo: CRO-L23
Falla: FRP
Soluciones que NO funcionaron: ..
Saludos colegas, a contiuanicion detallo el metodo de FRP para el Huawei Ascend Y5 Lite CRO-L23.
Abrimos NCKDongle AndriodMTK y en la opcion FRP-PATTERN-PRIVACY seleccionamos la marca del telefono, el modelo y luego presionamos Reset FRP.
Adjunto el log y la imagen del proceso.
Exe version: NCKDongle AndroidMTK 2.5.9.2
Selected model: Ascend Y5 Lite [CRO-L23C00]
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM36)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: d4:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
-Reading GPT Drive OK
Checking data, wait...
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.
Numero de Modelo: CRO-L23
Falla: FRP
Soluciones que NO funcionaron: ..
Saludos colegas, a contiuanicion detallo el metodo de FRP para el Huawei Ascend Y5 Lite CRO-L23.
Abrimos NCKDongle AndriodMTK y en la opcion FRP-PATTERN-PRIVACY seleccionamos la marca del telefono, el modelo y luego presionamos Reset FRP.
Adjunto el log y la imagen del proceso.
Exe version: NCKDongle AndroidMTK 2.5.9.2
Selected model: Ascend Y5 Lite [CRO-L23C00]
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM36)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: d4:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
-Reading GPT Drive OK
Checking data, wait...
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.