17-10-18, 08:47 PM
(13-10-18, 06:22 PM)nilsonperdomo92 escribió: Marca: Huawei
Numero de Modelo: CRO-L23
Falla: FRP
Soluciones que NO funcionaron: ..
Saludos colegas, a contiuanicion detallo el metodo de FRP para el Huawei Ascend Y5 Lite CRO-L23.
Abrimos NCKDongle AndriodMTK y en la opcion FRP-PATTERN-PRIVACY seleccionamos la marca del telefono, el modelo y luego presionamos Reset FRP.
Adjunto el log y la imagen del proceso.
Exe version: NCKDongle AndroidMTK 2.5.9.2
Selected model: Ascend Y5 Lite [CRO-L23C00]
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM36)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: d4:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
-Reading GPT Drive OK
Checking data, wait...
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.
Ya intentaste con Miracle crack 2.58? Yo he sacado muchos qualcomm de diferentes marcas con eso, sino prueba con esto,
https://www.youtube.com/watch?v=fDwxd5qCcsw.
Si hubo alguna solucion no se te olvide agradecer